How to Pair Bodypacks to Your AV System

1) On your bodypack (BP), open the battery compartment and make sure you're using fresh non-rechargeable batteries. Locate the set button on your BP (highlighted in Orange). 

2) On your Sennheiser receiver, press the Sync button (highlighted in purple). 

3) Hold your BP about six inches away form your receiver, press the Set button (highlighted in orange), and aim the sensor (highlighted in Blue) at the receiver (highlighted in Green). 

4) Your receiver should indicate a check mark once the sync process is done, and you should be able to test out your mic. 

• Related Articles

• Microphone Issues- Static Noise/ Loud Crackling Sound

  When you hear loud banging thunderous sounds through the mic system this is caused from equipment failure. This happen's for two reasons. 1. Internal partially severed wire connection in the microphone headset cable which causes the mic to disconnect ...

• Wisenet Setup (Mobile & Desktop)

  Camera System Mobile App Setup Step 1: Download and install the app by clicking the links below or searching ‘Wisenet mobile.’ Android Products: Click Here Apple Products: Click Here *When installing the software for the first time you will be given ...

• Step By Step Instructions For Re-Scanning Wireless Channels

  Step By Step Instructions For Re-Scanning Wireless Channels ***FIRST, ALWAYS TURN OFF THE POWER AMPS FROM THEIR OWN INDIVIDUAL POWER BUTTONS*** Turn the volume dial for the microphone to 0 Turn off the wireless bodypack Locate the Sennheiser wireless ...

• Preparing Computer for Remote DBX Access

  In order to have the sound system re-adjusted through remote access by one of our technicians, the client needs to have it properly prepared by following the steps below: 1 - Have a Windows based computer with one Ethernet port connection available. ...

• TeamViewer Setup

  When requesting remote support please follow the MAE TeamViewer setup guide.