Step By Step Instructions For Re-Scanning Wireless Channels

Step By Step Instructions For Re-Scanning Wireless Channels

Step By Step Instructions For Re-Scanning Wireless Channels

***FIRST, ALWAYS TURN OFF THE POWER AMPS FROM THEIR OWN INDIVIDUAL POWER BUTTONS***

  1. Turn the volume dial for the microphone to 0


  1. Turn off the wireless bodypack


  1. Locate the Sennheiser wireless microphone receiver in the Sound System rack


  1. Press the "Set"button to enter the Settings menu 


  1. Use the arrow buttons to scroll and select “Squelch”, select “Low” then press "Set" to store


  1. Use the arrow buttons to scroll and select "Easy Set Up" then press "Set" 


  1. Use the arrow buttons to scroll and select "Scan New List" Then press "Set" 


  1. As the receiver is scanning, look at the RF meter (located on the left side of the digital screen) for movement

    1. RF is any signal coming into your system. Since the bodypack is turned off, the ideal channel will have no RF movement.


  1. The receiver will automatically give you the best bank of channels when it's done scanning


  1. Press "Set" to move to the channel selection menu


  1. Use the arrow buttons to scroll and select a channel that has no movement on the RF meter 


  1. Once you find a channel with no RF movement, press "Set" to store


  1. Use the arrow buttons to scroll and select "Exit" and then press "Set"


  1. Press “Set” to go back into the settings menu


  1. Use the arrow buttons to scroll and select “Squelch”, press "Set" 


  1. Use the arrow buttons to scroll and select Middle squelch then press “Set” to store


  1. Use the arrow buttons to scroll and select “Exit” then press "Set" to go to the home screen


  1. Turn on your body pack, Press "Set" to enter the Settings menu


  1. Use the arrow buttons to scroll and select “Advanced Settings” and press "Set"


  1. Use the arrow buttons to scroll and select "Tune" press "Set" 


  1. Use the arrow buttons match the first three numbers with the receivers channel and press "Set" 


  1. Use the arrow buttons to match the next three numbers, and press "Set" to store


  1. Use the arrow buttons to scroll and select "Exit" then press set to get back to the home screen 


***AFTER RE-SCAN, TURN THE POWER AMPS BACK ON***






    • Related Articles

    • Wireless Microphone Tuning and Troubleshooting

      The Sennheiser receiver is built into the audio rack and receives its signal from the body pack transmitter. - Assigning a new frequency.* Press the set button on the Sennheiser receiver in the rack.*Use the arrow buttons to scroll up to easy setup ...

    • DMSS & SMART PSS Export Clip Instructions

      To export a clip using your phone for 30-minute-max recordings see the attached PDF: "How to Clip a Video Using DMSS" To export a clip using your computer for videos that have no limit to their recordings, see the attached PDF: "How to Clip a Video ...

    • Wisenet Setup (Mobile & Desktop)

      Camera System Mobile App Setup Step 1: Download and install the app by clicking the links below or searching ‘Wisenet mobile.’ Android Products: Click Here Apple Products: Click Here *When installing the software for the first time you will be given ...

    • Preparing Computer for Remote DBX Access

      In order to have the sound system re-adjusted through remote access by one of our technicians, the client needs to have it properly prepared by following the steps below: 1 - Have a Windows based computer with one Ethernet port connection available. ...

    • TeamViewer Setup

      When requesting remote support please follow the MAE TeamViewer setup guide.